
Insulated Glass Units (IGU) · EN 1279
Insulated glass units, built to your exact build-up
For contractors with a consultant's specification: insulated glass units (DGU), two panes sealed around a gap, assembled in our Riyadh factory.
8 mm SN 60 tempered + 16 mm air spacer + 6 mm clear
- EN 1279
- Argon module
- Coating face
For the contractor with a specified build-up
What goes into each unit, as you specify it
Coated glass: SunGuard and ClimaGuard coatings and other Guardian, Saint-Gobain and AGC Obeikan substrates — certified raw glass, traceable by batch.
Spacer and gas: spacer frames bent in-house to your airspace; argon filled on the line's argon module.
Panes: fully tempered (FT) or heat-strengthened (HS), laminated or annealed glass combined in one unit — a tempered coated outer pane over a laminated inner pane, for example.
Sizes: every unit is priced at its ordered size — send width × height per opening.
The IG line
Sealed on an automatic line, checked to EN 1279
The insulated-glass line and its QC → IGCC-certified insulating glass →
Delivered
Insulated units on facades you can walk past today

Desalination Oasis

Marriott Hotel
Brand-locked specifications
Specified in Guardian, Saint-Gobain or AGC? Send it as written.
We fabricate from certified raw glass of all three brands, including SunGuard and ClimaGuard coatings, and match most specified performance values.
When a specified brand or colour is not available, we propose an equivalent from the brands we process, with its datasheet, for your consultant's approval — the build-up keeps its spacer, gas and glass make-up.
Certified · Tested · Documented
ISO
ISO 9001:2015
Quality management system
Guardian
Certified fabricator
certificate HA220726
SGCC
Certified tempering
tempered safety glass
AGC Obeikan
Certified processor
coated glass
Trusted Across the Kingdom
Send the build-up the way you write it
01Per opening: glass + spacer + gas — e.g. 8 mm SN 60 tempered + 16 mm air spacer + 6 mm clear — with width × height and quantity.
02Quotation within 48 hours.
03Fabrication to EN 1279 with inspection reports at every stage, delivered Kingdom-wide on protective racks.
Drawings, cutting lists and bills of quantities are welcome — email them if the form is not enough.
info@goldenglass.com.sa
goldenglass.com.sa
Head office: 2341 Salahuddin Al Ayyubi St, Al Malaz, Riyadh 12841 (Additional No. 8311)
Factory & sales office: AlFawzan Industrial Zone, Al Kharj Road, Riyadh
Walid Saeed, Sales & Marketing Director · +966 54 756 5510 · WhatsApp